Preliminary steps before importing to the console :

Importing a card

On your PC :

• Download your map/task from the platform
• Insert on the key
• Before importing your recommendation card into the usb key, extract the .SHP, .DBF, .SHX files from the recommendation file (.zip).
  Create a folder called "Rx" (be sure to respect upper case), then insert the files in it (as below)
  

• You can insert several modulation cards in the same Rx file.
• Unplug your USB flash drive

On your console:

• Insert the USB stick into the appropriate port.
• Insert the usb key in the console

• Click on Import global recommendations and shapefile data
  
• Waiting
• Click on the icon in the bottom right corner

• Click on the GreenStar icon

• Click on Resources

• Click on Interventions

• Scroll down the list if necessary, select the corresponding operation

• Click on documents

• Click on add

• Click on product type

• Select the desired product

• Select the product name and fill in the dose unit

• Click on accept

• Import the prescription card: click on Rx

• Click prescription

• Select Shapefile

• Select your file

• Select product type

• Select "Fertilizer by weight".

• Select dose unit: L/ha or Kg/ha

• Indicate a dose in case of GPS loss then click on accept.

• Wait a few moments and then click on accept.

• Prescription page: click on accept

• Click on Cartograph

• Click on Param Cartog

• Choose from the background list, select mapping

• Click on accept

• View your modulation map in the background

Dose modulation is ready

Exporting data to MyEasyFarm

The greenstar 2600 console only exports in proprietary format. It is necessary to send the files through MyJohnDeere, Operation Center.

On the console:

• Insert the USB key back into the terminal.
• Click on "Data Export".
  
• A folder will then be created on the key, it can be removed at the end of the download.

On the computer:

• Plug in the USB flash drive
• Login to the MyJohnDeere site
• Click on and then on the "File Manager" tab. (https://files.deere.com)
• Load the file by clicking on
• Choose the corresponding folder and the files inside. The application will be visible as below :
  
• The files are then transferred to MyEasyFarm via the Operation Center integration.

Configuration

For your console to be able to modulate, it is necessary to activate the Section Cut, Documentation and Guidance options.

• To do this, go to the GS2 tab
  
• Check the necessary boxes as appropriate. If the tractor is connected to an ISOBUS implement, Machine and implement must also be activated.