NH Intelliview IV - Case IH Pro 700

1. Importing a card

On your PC (USB stick) :

• Upload your task from the platform
• Insert on the key
• Extract the TASKDATA folder from the .zip file, to do so, open the .zip file and move the TASKDATA folder to your USB flash drive.

• You can delete the zip file

• Unplug your USB flash drive

On your PC (PLM Module) :

• On MyEasyFarm, export your map to CNH (AFS Connect or MyPLMconnect) and select the farm you want to send your map to.
• 
• Then go to the  of your CNH platform.
• Select the "Company" tab and the "Data Files" sub-tab
• Click on "Send" on the file you have just transferred
• 
• And finally, select the hardware to which you wish to send the task

On your console (in either case) :

• Insert the USB into the switched-off terminal (if using a USB stick)
• Start the terminal
• Go to MENU
• Click on ISOBUS
• 
• In the "TC Main" tab, select the Cultivator (and if necessary, the farm, field and task).
• 
• Select the tool present
• 
• Then click on "TC map" and assign a map to an isobus tool (or an element of the tool)
• 
• Make sure your products are correctly configured by going to "TC Product".
• 
• Check that the information is correct and click on the "product management" tab to ensure that the product name is entered correctly.
• 
• You can select the plotting level (which item will be displayed on your screen cover)
• 
• Then go to "Performance" to check that the reading of the recommendation is activated
• 
• Set your default dosages (outside the mapped area) and ensure that the dosages do not exceed the Min / Max dosages of your card.
• 
• Once all your layers are configured, you return to Performance> TC> TC Task and select Start or Resume (Pause to stop the task temporarily)
• 

2. Exporting data to MyEasyFarm

To export data to MyEasyFarm, you must have created a colouring (called a path on this console) and a boundary. The colouring is done automatically when an ISOBUS implement is attached. If not, you have to save the path manually

On the console (regardless of the method)

• Once all the work is done, insert a USB stick into the terminal (if you are using a USB stick),
• Go to the MENU by clicking on BACK several times
• Go to the Data Managersection
• 
• Click on Export
• 
• Then select the data to be exported. Use cn1 mode for task data. For parcel contours only, you should use isoxml.
• 
• Then select Export, top right

• You can then find your files directly in MyEasyFarm!

3. Configuration :

To be able to modulate automatically, your Intelliview IV or AFS Pro 700 console must be enabled for modulation with the following options:

• TC SC: Automatic management of part width section breaks
• TC Geo: Automatic management of dose modulation

To be able to manage the parcel contours, the main screen (which can be customised) must be configured. The "Boundary" option must be displayed.