Prerequisites for data exchange :
The console must have ISOBUS TC and TRACK-leader licenses.
The console must be in extended mode (isoxml)
1. Configuration
Setting up your console :
Go to settings from the Isobus TC tab
Select Extended
Click on back
2. Importing Tasks to the Console :
On your PC :
- Upload your task from the platform
- Insert on the key
- Extract the TASKDATA folder from the .zip file, to do so, open the .zip file and move the TASKDATA folder to your USB flash drive.
- You can delete the zip file
- Unplug your USB flash drive
On your console:
Tasks are called "missions" on this terminal.
To import a task,
- Click on
- If a task is already present on the consoleClick on Logout
and on YES (otherwise skip this step) - Then select the button
- Finally, select the corresponding task
- Check the information in the task, then start it, by clicking on
and on YES in the window that appears. - click twice on Back
and on YES (otherwise skip this step)
and on YES in the window that appears.
3. Exporting tasks from your console :
Once the task is completed,
- Stop the task. To do this, click on and then on
- Click twice on Back
- Then disconnect the USB key by tapping on
- All that's left to do is import the task into MyEasyFarm!
Appendix: working with several application maps simultaneously
Simultaneous use of several application cards
With TRACK-Leader you can use several application cards for different dosing devices simultaneously.
Requirements :
▪ Both application cards must be part of the same ISO-XML mission.
▪ The ISOBUS computer of the attached device must be compatible with this function.
There are the following scenarios for the simultaneous use of several application maps :
▪ Attachment with several metering devices and different working widths
▪ Trailed implement equipped with several metering devices and having a single working width
In both cases, you have the option of selecting the application card to be displayed on the screen during work. Depending on the scenario, handling in the TRACK-Leader is different.
Use of several different dosing devices and working widths
The mounted implement is equipped with several metering units, each of which has its own working width. For example, a sprayer with two sets of valves and two booms, a combined seed/fertiliser combination. The working widths can then be fitted one behind the other.
You can toggle the display between the Application Cards in the following way:
🗹 Guiding with the application maps has started.
- In the working mask, tap on the gear icon.
⇨ The following application map of the mission is displayed.
Use of several dosing devices with one working width
The mounted implement is equipped with several metering units that share one working width. For example, a fertiliser spreader with more than one hopper and several metering units with only one working width. In this type of fertiliser spreader, the fertiliser is mixed from various hoppers and spread by a spreading device.
You can toggle the display between the Application Cards in the following way:
🗹 Guiding with the application maps has started.
- In the lower left hand corner above the counter area the sprayed product description is displayed. Tap on this text.
⇨ The following application map of the mission is displayed.
